• Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
• Lower temperature: extends life of LEDs, reduces light decay.
• Protects against steam and water damage.
• No discolouring of waterproof coating.
• LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend using fully waterproof IP68 LED Strip, Contact us for details.

To control your CCT LED Strips we recommend you use our CCT White Adjustable Controllers.

Strip Lengths

This strip is sold by the metre. This 24v CCT LED Strip Light is manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end. The cable consists of 3 cores; white, yellow, brown.

You can cut the strip to length yourself (with scissors), to as small as every 27.78mm.

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post 24V CCT COB Adjustable White LED Strip IP65 appeared first on LED Lighthouse.

• Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
• Lower temperature: extends life of LEDs, reduces light decay.
• Protects against steam and water damage.
• No discolouring of waterproof coating.
• LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend using fully waterproof IP68 LED Strip, Contact us for details.

To control your CCT LED Strips we recommend you use our CCT White Adjustable Controllers.

Strip Lengths

This strip is sold by the metre. This 12v CCT LED Strip Light is manufactured and supplied in 5m lengths, so purchases of strips less than 5m in length are non-returnable after they have been cut to size for you.

We supply 5 metre strips with an input cable at both ends. Shorter strips have an input cable at one end. The cable consists of 3 cores; white, yellow, brown.

You can cut the strip to length yourself (with scissors), to as small as every 13.38mm.

Up to 5 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post 12V CCT COB Adjustable White LED Strip IP65 appeared first on LED Lighthouse.

App Control and Alexa Compatible

Our new LED TV sync kit is controlled from your phone and can also be integrated with Alexa. Download the SmartLife App to control your new TV LED lights from your phone. Custom settings include video mode (sync with the images on the screen), music mode (flashes and changes colour to the sound of music) and you can change the intensity of the synchronization from high, medium or low to give you the perfect viewing experience.

You can also choose one standard colour to have the lights set to, choose from any colour imaginable!

You can also set the Smart LED lights to one of the twelve pre-programmed scenes which include a rainbow setting and the comet effect around your TV.

Pre-Cut LED Strip Lengths

The LED strip in the TV sync kit comes pre-cut and wired. Choose from the 50″-65″ or the 70″-85″ LED kit. The LED strip lengths for the 70″-85″ kit are- side pieces 80cm, top and bottom pieces 1.4m. The LED strip lengths for the 50″-65″ kit are- side pieces 70cm, top and bottom pieces 1.2m.

Installation of Backlight Kit

Please ensure the surface you are mounting the LEDs to is clean and free of dust, we recommend using something similar to nail varnish remover to ensure the surface is completely clean.

1.) Starting from the left-hand side of the rear of the TV, carefully remove the adhesive paper backing and firmly press the LED strip onto the rear of the TV. The LED strip comes in one piece but has small cables to allow manipulation around the corners of your TV.

2.) Once completed, you can use the stick-on clips to hold the corner cables in place behind the TV so they can’t be seen.

3.) Plug the LED lights into the HDMI control box. The HDMI control box requires a power supply.

4.) Plug in the HDMI control box using the UK 3-pin plug supplied.

5.) Connect your HDMI input from your device to the control box and the physical installation is complete.

6.) Download the SmartLife App from the App Store and away you go!

The post RGBW LED TV Backlight Kit – HDMI TV Sync appeared first on LED Lighthouse.

This LED strip is fitted with a seperate white and coloured LED chips, ideal when both lighting effect are required.

Our RGBW LED Strip features the latest integrated LED giving a superior colour mix and colour strength. Consisting of 840 RGBW LEDs per metre. LEDs are mounted on a white PCB (Printed Circuit Board). Our RGBW strip lights have a 3M self adhesive backing for easy installation. Available in upto a 10m length and cuttable every 33.3mm

Microtech Flexible LED Strip Light IP65 With High Grade Epistar RGBW LEDs

Manufactured using ultra efficient RGBW LEDs from Epistar, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective.

Micro Tech LED Strip Advantages

• Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
• Lower temperature: extends life of LEDs, reduces light decay.
• Protects against steam and water damage.
• No discolouring of waterproof coating.
• LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend our Fully Waterproof IP68 RGB LED Strip.

The post COB RGBW LED Strip Light 24V appeared first on LED Lighthouse.

• Control LED strip lighting with your Smartphone from anywhere in the world.
• Alexa compatible
• Supports both IOS products (iPod, iPhone, iPad…) and Android products (Samsung, HTC…)
• Free app download available from Google Play and iTunes (L-BUS)
• Simply connect the device to your local WiFi network to enable total control over your LED strip lighting.
• Wireless or wired connection to the local WiFi network router.
• Set up to 16 different scenes of LED lighting to suit any occasion.
• Personalised timer functions enable timed control over the LED lights.
• Can be used as a dimmer controller, colour temperature controller or colour controller for RGB or RGBW LED Strips – Altogether there are 4 interface options, each one designed especially for the LED Strip used.
• Each WiFi controller can control up to 16 lighting zones. These 16 zones can be controlled separately or simultaneously.
• Compatible with the ‘EX’ series touch panel and the ‘Q’ series hand held remote. For multi-zone installations wireless zone receivers (F4-5A, F4-3A) are required, one for each zone. Multiple receivers can be linked to form one single zone if required.
• Control multiple WiFi-108 controllers through the L-BUS App. Each controller can still control up to 16 individual zones each and be accessed from anywhere in the world.
• All of our ‘EX’ series touch panels and ‘Q’ series hand held remotes can be added into this system offering the user fixed dedicated wall mounted control and multiple remote control. The WIFI-108 controller and the ‘Q’ series remote or ‘EX’ series touch panels connect to the same wireless zone receivers.

Suggested matching items…

Zone Receivers: Useful when more than one zone of lighting requires control and/or a touch wall panel controller with multi-zones is integrated into the system. The WiFi controller transmits a wireless RF signal that can be received by wireless F4-5A/F4-3A zone control receivers. The ‘control receivers’ then control a zone of lighting each.

Wall Touch Controller: With the addition of a touch panel controller, wireless zone receivers (F4-5A/F4-3A) already used by the WiFi-108 can be controlled from a touch panel.

The post RGB(W) WiFi-108 Smart LED Strip Controller Single or Multi-Zone appeared first on LED Lighthouse.

The LED strip can be cut with scissors, to as small as every 3 LEDs (5cm). Once cut the end of the LED strip will need sealing. We sell small tubes of clear silicone and clear rubber end caps which can be used to seal the cut end of the LED strip. Select the ‘Sealing Kit’ if required. The kit includes two end caps and 1 small tube of silicone.

The LED strip is self adhesive backed, however water can degrade the adhesive over time. Alternatively we sell clear mounting clips which screw down to secure the LED strip. Select ‘Mounting Clips’ in the blue options box if required. They are sold in packs of 20.

Up to 5 metres of LED strip can be wired in series with the controller. Additional LED strips need to be connected in parallel (see the Diagram).

Installing the IP68 LED strip in a suitable housing

Due to the increased height of the IP68 LED strip, the only suitable profile is the ‘Square’ aluminium housing.

The post Waterproof RGB LED Strip Lights 60 LED/m 12V appeared first on LED Lighthouse.

Strip Lengths

This red LED strip is sold by the metre. 24v Coloured LED Strip Lights are manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (10cm).

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post Red LED Strip Lights – Splashproof 60 LED/m 24V appeared first on LED Lighthouse.

Strip Lengths

This green LED strip is sold by the metre. 24v Coloured LED Strip Lights are manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (10cm).

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post Green LED Strip Lights – Splashproof 60 LED/m 24V appeared first on LED Lighthouse.

This LED strip is sold in 2.5m, 5m, 7.5m and 10m lengths. We can also supply bespoke lengths in increments of 10cm by special order with a 10-14 day lead time – Contact us for details.

As standard, this LED Strip is manufactured and supplied in 5m and 10m lengths, so purchases of strips other than these standard lengths are non-returnable as they have been cut to size or specially manufactured for you.

We supply 5m and 10m strips with an input cable at both ends. Other length (2.5m and 7.5m) strips have an input cable at one end.

Cutting and Sealing the LED Strip

The LED strip can be cut with scissors, to as small as every 6 LEDs (10cm). Once cut the end of the LED strip will need sealing. We sell small tubes of clear silicone and clear rubber end caps which can be used to seal the cut end of the LED strip. Select the ‘Sealing Kit’ in the blue options box if required. The kit includes two end caps and 1 small tube of silicone.

The LED strip is self adhesive backed, however water can degrade the adhesive over time. Alternatively we sell clear mounting clips which screw down to secure the LED strip. Select ‘Mounting Clips’ in the blue options box if required. They are sold in packs of 20.

Up to 10 metres of LED strip can be wired in series with the controller. Additional LED strips need to be connected in parallel (see the Diagram).

Installing the IP68 LED strip in a suitable housing

Due to the increased height of the IP68 LED strip, the only suitable profile is the ‘Square’ aluminium housing.

The post Waterproof RGB LED Strip Lights 60 LED/m 24V appeared first on LED Lighthouse.

• Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
• Lower temperature: extends life of LEDs, reduces light decay.
• Protects against steam and water damage.
• No discolouring of waterproof coating.
• LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend using fully waterproof IP68 LED Strip, Contact us for details.

To control your CCT LED Strips we recommend you use our CCT White Adjustable Controllers.

Strip Lengths

This strip is sold by the metre. This 24v CCT LED Strip Light is manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end. The cable consists of 3 cores; white, yellow, brown.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (5cm).

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post 24V CCT Adjustable White LED Strip IP65 appeared first on LED Lighthouse.